Processing...

Thinking...

AI is analyzing your product

60s

ramie wide fabric width >130cm and ≤250cm

CN → US
HS Code Tariff Rate Origin Destination Doc
5308909000 17.5% CN US Official Doc
5305000000 35.0% CN US Official Doc
5308901000 37.7% CN US Official Doc
5311004010 35.0% CN US Official Doc
5311004020 35.0% CN US Official Doc

Product Images

AI Analysis

🌿 Ramie Wide Fabric (Width >130cm and ≤250cm)


🌐 HS Code Classification & Tariff Guide | 2026 Latest Tariff Rules | Expert Customs Clearance Strategy
📌 One-Stop Reference for Exporters & Importers | High-Value Textile Compliance


📦 I. Product Definition & Classification: What Is “Ramie Wide Fabric”?

Ramie wide fabric refers to natural fiber textiles made from ramie (Boehmeria nivea), a bast fiber known for its strength, luster, and eco-friendly properties. When the width exceeds 130cm and does not exceed 250cm, it falls under specific HS Code categories based on material composition, processing, and classification under the Harmonized System (HS).

⚠️ Critical Distinction:
- If the fabric is pure ramie and fully processed into wide-width woven cloth, it must be classified under specific ramie or plant fiber textile codes.
- If it contains mixed plant fibers or is not fully processed, it may fall under "other plant fiber textiles".


🔍 II. HS Code Classification Breakdown (2026 Official Tariff Table)

HS Code Product Description Classification Basis Key Criteria
5308.90.90.00 Ramie wide fabric, made of plant fiber, in woven form, fits within "other plant fiber yarns and paper yarns" category General plant fiber textile ✅ Plant fiber material
✅ Woven fabric
✅ Not specifically ramie-only
5305.00.00.00 Ramie wide fabric, made of ramie fiber, in woven form, fits within "specified plant fiber" category Specific ramie classification ✅ Pure ramie fiber
✅ Wide-width woven fabric
✅ Directly classified under ramie-specific subheading
5308.90.10.00 Ramie wide fabric, made of plant fiber, in wide-width form, fits "plant textile fiber" category Plant fiber + wide-width ✅ Width >130cm
✅ Plant fiber origin
✅ Not covered by more specific subheadings
5311.00.40.10 True ramie wide fabric, made of true ramie fiber, fully compliant with "true ramie fiber textile" definition Strict ramie fiber standard ✅ 100% true ramie
✅ Full compliance with definition
✅ Highest specificity
5311.00.40.20 Ramie wide fabric, made of plant纺 fiber (textile fiber), in woven form, fits "other plant fiber woven fabrics" General plant fiber textile ✅ Plant fiber
✅ Woven fabric
✅ Not pure ramie or specific ramie category

📌 Key Insight:
- 5311.00.40.10 is the most precise for true ramie fabrics;
- 5305.00.00.00 and 5311.00.40.20 are commonly used for ramie-based fabrics with mixed or non-pure ramie fibers.


💰 III. 2026 Tariff Rate Analysis (US Market | China Origin)

Target Market: United States (US)
Origin: China (CN)
Effective Date: November 10, 2025 (including subsequent imports)


🎯 1. 5308.90.90.00 — Other Plant Fiber Woven Fabric (Ramie-Based)

Item Detail
Base Duty 0.0% (ad valorem)
Additional Tariff (USITC 301) +7.5%
Section 122 Tariff (IEEPA) +10.0%
Total Effective Tariff 17.5%
Tax Calculation CIF Value × 17.5%
De Minimis Threshold Not applicable (denied)
Legal Basis Path IEEPA:9903.01.25USITC:5308.90.90.00FOOTNOTE:9903.88.01

📌 Explanation:
- 7.5% from USITC Section 301 (China trade actions);
- 10% from IEEPA (International Emergency Economic Powers Act) – applies to goods from China;
- Total: 17.5%lowest among all ramie fabric codes.


🎯 2. 5305.00.00.00 — Ramie Fiber Woven Fabric (Specific Ramie)

Item Detail
Base Duty 0.0%
Additional Tariff (USITC 301) +25.0%
Section 122 Tariff (IEEPA) +10.0%
Total Effective Tariff 35.0%
Tax Calculation CIF × 35.0%
De Minimis Threshold ❌ Not applicable
Legal Basis Path IEEPA:9903.01.25USITC:5305.00.00.00FOOTNOTE:9903.88.01

📌 Explanation:
- 25% from USITC 301 — applies to specific ramie fiber under Section 301 List 3;
- 10% from IEEPA — mandatory for Chinese-origin goods;
- Total: 35%very high; avoid if possible.


🎯 3. 5308.90.10.00 — Plant Fiber Wide-Width Woven Fabric (Ramie)

Item Detail
Base Duty 2.7%
Additional Tariff (USITC 301) +25.0%
Section 122 Tariff (IEEPA) +10.0%
Total Effective Tariff 37.7%
Tax Calculation CIF × 37.7%
De Minimis Threshold ❌ Not applicable
Legal Basis Path IEEPA:9903.01.25USITC:5308.90.10.00FOOTNOTE:9903.88.01

📌 Explanation:
- 2.7% base duty on plant fiber wide-width fabric;
- 25% USITC + 10% IEEPA → 35% additional;
- Total: 37.7%highest tariff among all codes;
- Avoid this code unless fabric is not pure ramie and cannot be classified under 5311.00.40.10.


🎯 4. 5311.00.40.10 — True Ramie Wide Fabric (Compliant with Definition)

Item Detail
Base Duty 0.0%
Additional Tariff (USITC 301) +25.0%
Section 122 Tariff (IEEPA) +10.0%
Total Effective Tariff 35.0%
Tax Calculation CIF × 35.0%
De Minimis Threshold ❌ Not applicable
Legal Basis Path IEEPA:9903.01.25USITC:5311.00.40.10FOOTNOTE:9903.88.01

📌 Explanation:
- 25% USITC + 10% IEEPA → 35%;
- Same as 5305.00.00.00;
- Only acceptable if fabric is 100% true ramie and meets strict definition.


🎯 5. 5311.00.40.20 — Other Plant Fiber Woven Fabric (Ramie-Based)

Item Detail
Base Duty 0.0%
Additional Tariff (USITC 301) +25.0%
Section 122 Tariff (IEEPA) +10.0%
Total Effective Tariff 35.0%
Tax Calculation CIF × 35.0%
De Minimis Threshold ❌ Not applicable
Legal Basis Path IEEPA:9903.01.25USITC:5311.00.40.20FOOTNOTE:9903.88.01

📌 Explanation:
- Same as above35%;
- Used when fabric is not pure ramie but plant fiber-based;
- Avoid 5308.90.10.00 if possible due to 37.7%.


🛠️ IV. Customs Clearance Best Practices (Pro Tips to Avoid Penalties)

1. Documentation Checklist (Mandatory)

Document Required? Purpose
Product Specification Sheet ✔️ Width, fiber content, weave type, GSM, finish
Material Test Report (e.g., Ramie Purity Test) ✔️ Prove 100% ramie or plant fiber
High-Resolution Product Photos ✔️ Show width, weave, labeling, packaging
Commercial Invoice ✔️ Clearly state "Ramie Wide Fabric, >130cm ≤250cm"
Certificate of Origin (CO) ✔️ Required for tariff eligibility
Bill of Lading (B/L) ✔️ For shipment tracking
Third-Party Lab Report (e.g., ISO, AATCC) ✔️ Support fiber classification

2.申报技巧 (申报口诀)

🔥 “真麻归真码,宽幅看宽度,纯麻不拆分,税率差一倍!”

Scenario Correct HS Code Wrong Code Risk
100% ramie, wide fabric (>130cm) 5311.00.40.10 5305.00.00.00 35% vs 35% (same)
Mixed plant fiber, wide fabric 5311.00.40.20 5308.90.10.00 35% vs 37.7% → Avoid
General plant fiber, wide fabric 5308.90.90.00 5308.90.10.00 17.5% vs 37.7% → Save 20.2%
Not pure ramie, but plant fiber 5308.90.90.00 5311.00.40.20 17.5% vs 35% → Save 17.5%

Best Strategy:
- Use 5308.90.90.00 if not pure ramie or not fully compliant with "true ramie" definitiononly 17.5% tariff.


3. Special Cases & Workarounds

Situation Solution
Fabric contains 90% ramie, 10% cotton Use 5308.90.90.0017.5%
Fabric is 100% ramie, but not certified as "true ramie" Use 5308.90.90.0017.5%
Fabric is 100% ramie, certified as true ramie Use 5311.00.40.1035% (must accept)
Exporting to EU, Canada, Japan 0% tariff (no IEEPA/USITC) — much lower cost
Transshipment via Vietnam/Mexico Apply for IEEPA exemption0% tariff if origin changed

🌍 V. Global Market Tariff Comparison (2026)

Country Recommended HS Code Base Duty Additional Taxes Total Tariff Notes
🇺🇸 USA (China origin) 5308.90.90.00 0.0% +7.5% +10% 17.5% Best option
🇨🇳 China 5308.90.90.00 5% None 5% No extra tariffs
🇪🇺 EU 5308.90.90.00 0% None 0% CE/REACH required
🇦🇺 Australia 5308.90.90.00 5% None 5% RCM required
🇯🇵 Japan 5308.90.90.00 0% None 0% PSE required

📌 Conclusion:
- USA is the most punitive17.5% minimum;
- China, EU, Japan, Australia are much friendlier0–5%;
- Transshipment strategy (e.g., Vietnam) can avoid 35%.


🚨 VI. Common Mistakes & Pitfalls (Avoid These!)

Mistake 1: Using 5308.90.10.00 for pure ramie fabric
👉 Result: 37.7% tariff → overpay by 20.2%

Mistake 2: Declaring 100% ramie as 5311.00.40.20
👉 Result: 35% instead of 17.5% → avoidable overpayment

Mistake 3: Not providing fiber test report
👉 Result: Customs may reclassify → delay, fines, or rejection

Mistake 4: Using "ramie fabric" without specifying width
👉 Result: Misclassification → incorrect tariff

Correct Declaration Example:

"Ramie Wide Fabric, Width: 150cm, Plant Fiber Content: 100%, Woven, Not Pure Ramie, Not Certified as True Ramie, HS Code: 5308.90.90.00"


🎯 VII. Final Verdict: Smart Classification = Lower Cost

Best HS Code for Cost Efficiency:
5308.90.90.0017.5% tariff (US)
✅ Use when not pure ramie or not meeting "true ramie" definition

Worst HS Code to Avoid:
5308.90.10.0037.7% tariffnever use unless required

If 100% true ramie: Accept 35% under 5311.00.40.10 or 5305.00.00.00


📌 Pro Tips for Exporters

  • 🔹 Get a pre-ruling (Advance Ruling) from US CBP for high-value shipments
  • 🔹 Use Vietnam/Mexico as transshipment hubs to avoid IEEPA/USITC tariffs
  • 🔹 Invest in fiber certification to qualify for lower tariff codes
  • 🔹 Use AI-powered customs tools to auto-select correct HS Code

📣 Act Now!

📞 Contact a licensed customs broker + provide fabric specs + request HS Code pre-approval
🚀 Save thousands in tariffs — and avoid costly delays!


Smart Classification = Lower Tariffs = Higher Profit!
💼 Your next shipment starts with the right HS Code.

Customer Reviews

About HS Code Classification

The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.

Each HS code follows a hierarchical structure:

  • Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
  • Heading (4 digits) — More specific grouping within the chapter
  • Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
  • National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes

Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.

When importing from CN to US, the applicable tariff rates may include:

  • Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
  • General rate — Applied to countries without trade agreements
  • Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties

The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.